Cronologic Ndigo Crate Guia do Utilizador descarregar pdf (Página 56)

6.5 Information Required by DIN EN 61010-1

6.5.1 Manufacturer

The Ndigo250M-14 is a product of:

cronologic GmbH & Co. KG

Jahnstraße 49

60318 Frankfurt

HRA 42869 beim Amtsgericht Frankfurt/M

VAT-ID: DE235184378

6.5.2 Intended Use and System Integration

The devices are not ready to use as delivered by cronologic. It requires the development of

specialized software to fulﬁll the application of the end user. The device is provided to system

integrators to be built into measurement systems that are distributed to end users. These

systems usually consist of a the Ndigo250M, a main board, a case, application software and

possible additional electronics to attach the system to some type of detector. They might also

be integrated with the detector.

The Ndigo250M-14 is designed to comply with DIN EN 61326-1 when operated on a PCI

compliant CEM main board housed in a properly shielded enclosure. When operated in a closed

standard compliant PC enclosure the device does not pose any hazards as deﬁned by EN 61010-1.

Radiated emissions, noise immunity and safety highly depend on the quality of the enclosure.

It is the responsibility of the system integrator to ensure that the assembled system is compliant

to applicable standards of the country that the system is operated in, especially with regards

to user safety and electromagnetic interference. Compliance was only tested for attached cables

shorter than 3m.

All power supplied to the system must be turned oﬀ before installing the board.

When handling the board, adequate measures have to be taken to protect the circuits against

electrostatic discharge (ESD).

6.5.3 Cooling

The Ndigo250M-14 in its base conﬁguration has passive cooling.

cronologic GmbH & Co. KG 52 Ndigo250M-14 User Guide

1 2 ... 51 52 53 54 55 56 57

Sem comentários

Cronologic Ndigo Crate Guia do Utilizador Página 56